ART PROF GROUPCONSTRUCTION COMPANY
EN
Request a quote ↗
← All expert advice
ART PROF GROUP · EXPERT GUIDE

Roof insulation and roofing

Roof insulation and roofing

Roof insulation and roofing

A successful renovation starts with choices suited to your home, budget and needs. Here are the most important questions to discuss with your contractor before agreeing on a quote.

01

Repair or replace your roof: how to decide

If there is a wet spot on the ceiling, do not rush to agree to replace the entire roof. Water often enters through a separate abutment, damaged shingles or clogged drain. When inspecting, it is important to determine not only the place where moisture manifested itself, but also its path: inside the structure, it can move for several meters. Evaluate the condition of the coating, roof layer, rafters, crates and thermal insulation. If the problem is single and the rest of the elements are working, local repairs may be wiser. If the damage is repeated, the wood rots or the coating has lost its strength, complete reconstruction is often more economical than a series of temporary patches. You need to compare options based on the results of the survey, and not on the appearance of the roof from the street.

Practical tip

Ask for photos of problem nodes and two estimates: for local repairs and for full recovery, explaining what risks remain in each case.

02

Why the roof leaks: seven places that are inspected first

Often the weak spot is not in the middle of the stingray. Water can pass adjoining to the chimney, walls and attic windows, endowments between stingrays, damaged skate, cracks in the coating, fasteners and joints of membranes. Another common cause is crowded gutters or improperly arranged drain of a flat roof. In the attic, you should look for darkened wood, the smell of dampness, wet areas of insulation and traces of condensation. If spots appear predominantly after a cold night rather than rain, the cause may be due to moist air from the home. It is dangerous to go out on a wet or windy roof on your own; the examination of high-rise areas is trusted by specialists.

Practical tip

Write down what rain or temperature stains appeared after. This helps distinguish the external leak from the condensation inside the structure.

03

Sloping roof: tiles, coating and hidden layers

On pitched roofs in the Netherlands, ceramic and concrete tiles are often found. When choosing, you need to take into account the permissible slope, the weight of the coating, the design of the base and the compatibility of accessories. Ceramics are valued for their traditional appearance; concrete options may be more affordable, but the properties depend on the particular model. However, the shingles are only the upper layer. Under it can be slats, membrane, insulation and load-bearing wood. Replacing one shingle will not fix the damaged underroof system. When overhauling, check if the offer includes wood repairs, membranes, skate elements, snow protection, if necessary, and mounting units.

Practical tip

Ask the contractor for the exact name of the material, the manufacturer’s slant requirements, and a warranty for installation, not just the shingles themselves.

Sloping roof: tiles, coating and hidden layers
Sloping roof: tiles, coating and hidden layers
04

Flat roof: bitumen waterproofing or EPDM?

A flat roof should actually divert water with the provided slope and water receivers. For repairs, bitumen materials and the EPDM membrane are often considered. Bitumen systems have long been used on such roofs, allow various methods of installation and repair. EPDM is elastic and is produced in large canvases, which can reduce the number of joints, but the quality of adjoinments, glue and bases is crucial here. You cannot choose a system only for the advertised service life. Clarify compatibility with the existing coating, surface preparation, fastening methods, fire requirements and overflow device. Standing water, swelling, and cracks require an assessment of the causes, not just a new layer sticker on top.

Practical tip

Ask not just the price per square meter, but the drawing of the nodes of the parapet, drain and adjoining the wall: it is there that problems often arise.

05

Insulation of the roof: when it is better from the outside, and when from the inside

The roof can be a major source of heat loss, especially if the attic is used as a living space. If the old coating is still removed, external insulation often allows you to make a more continuous thermal insulation circuit and save space inside. Insulation from the inside is sometimes easier without removing shingles, but it is important to properly seal and check where the moisture will go. For a flat roof, the design is even more sensitive to the wrong location of the insulation and vapor insulation. The thickness is chosen not by eye, but taking into account thermal conductivity, existing layers, height of the structure and applicable requirements. New insulation should not hide rotting wood or an old leak.

Practical tip

First assess the condition of the roof and the existing “cake”, then choose the thickness and material of the insulation – not vice versa.

06

Condensate and mold: errors in vapour insulation

Even an ideal exterior coating will not save you if humid warm air from residential premises uncontrollably enters the cold layers of the roof. It can condense on wood and gradually cause mold and decay. It is especially risky to close an old structure with a new vapor-proof material without checking whether it can dry out. The continuity of the airtight layer, gluing of joints and neat passages of cables, ventilation and pipes are important. There is no universal scheme for all roofs: it depends on the type of construction, materials and internal humidity. In case of doubt, you need to calculate and check a specialist.

Practical tip

Ask to describe the order of the layers on the inner and outer sides and show how the connections with the floors and walls are made.

07

Gutters, gutters, chimneys and abutments

When repairing, the entire water drainage system should be considered. If the gutter is overflowing or water is dumped on the wall, even a new roof will not protect the facade and finish from dampness. On the pitched roof, check the endows and places of adjoining to vertical surfaces; on the flat - water receivers, parapets and emergency drain. Around the chimney and attic window need properly mounted salaries and waterproofing parts. Using one sealant instead of a suitable structural unit often gives only a temporary effect. Maintenance of drains is also important after completion of repairs.

Practical tip

Make the replacement of gutters, pipes, salaries and abutments in separate lines of the estimate: otherwise they are often found as “additional work”.

08

Attic window or dakkapel: how to make the attic useful

The attic window gives natural light and the possibility of ventilation, almost without changing the silhouette of the building. Dakkapel - a superstructure on a ray, usually with a vertical front wall - can noticeably increase the usable height and area. The choice depends on the purpose of the room: the bedroom is important dimming and ventilation, the office - comfortable light without glare, the bathroom - protection from moisture. Consider overheating in summer, insulation of adjoining areas and availability of service. A permit may be required for dakkapel, with regulations depending on the specific address, dimensions, roof position and municipality requirements. Check them through Omgevingsloket before ordering.

Practical tip

First, agree on a plan for using the attic, then choose a window or add-on and check the technical and permitting conditions.

Attic window or dakkapel: how to make the attic useful
Attic window or dakkapel: how to make the attic useful
09

Solar panels and green roof: consider before repair

If solar panels are planned in the future, it is reasonable to assess the condition of the roof in advance: it will be expensive to dismantle the panels in a few years for the sake of new waterproofing. The permissible load, condition of attachment, safety and location of cable passages shall be checked. Green roofing can improve rainwater retention and summer comfort, but adds load from the water-saturated substrate and requires suitable waterproofing, root protection and drainage maintenance. Neither solar panels nor plants replace a proper roofing system. Some solutions may have local policies and support programs that should be reviewed separately.

Practical tip

Tell the contractor about plans to install panels or green roofing before choosing insulation and waterproofing.

10

How is the quality repair: from inspection to acceptance

Reliable work begins with survey, photo fixation and an agreed estimate. Then secure access is arranged, property is protected and only the necessary layers are dismantled. After opening, assess the wood, the state of insulation and traces of hidden wetness; any deviations are agreed before continuation. Next, repair the base, insulation, waterproofing, laying the coating, installation of salaries, gutters and drains. During work, the house should be protected from precipitation, even if the cover is still removed. At the reception check nodes, drainage, appearance, cleanliness of the site and documents for materials and guarantees.

Practical tip

Arrange in advance for photos of hidden stages and how additional work is recorded after defects are discovered.

11

How to Read Estimates and Compare Contractors

A "roof replacement for a fixed amount" proposal is useless if it's unclear what's included. Ask for a breakdown into forests and safety, dismantling and disposal, wood repair, membrane, insulation, exterior covering, fasteners, skates and salaries, drains, interior finishing and cleaning. Compare not only prices, but also volumes, brands of materials, terms, payment procedure, actions in bad weather and guarantees. Older homes are bound to have hidden defects; it is reasonable to agree on a procedure for agreeing on changes. The lowest number in advertising does not always mean the best value.

Practical tip

Ask for two comparable versions of the offer - the necessary repair and the recommended comprehensive solution - with an explanation of the difference.

12

Checklist of the home owner before ordering

Before signing the contract, you must have: photos and a description of the condition of the roof; an understandable reason for the repair; the composition of all layers; the chosen coating and compatible accessories; a solution for insulation and moisture; a proven drainage; a list of works around the chimney and windows; agreed forests and rain protection; schedule, payment procedure and written guarantees. If you plan to dakkapel, specify the need for permission. If you have solar panels or a green roof, check the allowable load. Finally, make sure the contract describes who is responsible for hidden defects and cleaning after the work is completed.

Practical tip

You can send photos of the roof, approximate area and a description of the problem: so it is easier for the contractor to prepare a subject proposal instead of a conditional price.

13

The roof as a system: why it is not enough to replace only shingles

The owner sees primarily the external material - shingles, roofing sheet or membrane. However, the reliability of the roof is created together by a load-bearing structure, base, waterproofing layer, insulation, air and steam control, drainage details and roofing. Each layer has its own task. The top cover accepts precipitation, but adjoining, gutters and underroof protection are no less important. Thermal insulation retains heat, but by itself does not replace either the sealing or the steam-regulating layer. Therefore, the proposal “remove old shingles and put a new one” should be evaluated carefully: if there is damaged wood or wet insulation under it, the problem will remain. Responsible repairs begin with a survey of the entire system. When defects are found, the contractor must indicate which elements to replace, which can be retained and how the new materials will be compatible with the old ones. So the customer understands what he pays for and why the result should last longer.

Practical tip

Ask for a diagram of existing and new layers, indicating adjoinments, ventilation, and places where access for maintenance is possible.

14

First inspection: what signs will tell about the condition of the roof

Start with internal signs: stains on the ceiling, swollen paint, the smell of dampness in the attic, darkened areas of wood and a wet insulation. From the outside, pay attention to displaced tiles, damaged skate elements, deformed gutters, vegetation in gutters and dilapidated salaries. At the same time, the spot directly under the chimney does not prove that the water got there: it is able to flow along the lining or wooden elements and manifest itself elsewhere. You do not need to walk on the roof yourself, especially after rain or during the wind. The specialist examines the risk nodes in a safe way, documents the findings with photographs and, if necessary, uses instruments to assess humidity. It is important to distinguish leakage from condensation: the first is often associated with rain and wind, the second can intensify in frosty weather or with poor ventilation of wet rooms.

Practical tip

Keep a short log of the appearance of spots: date, weather, room, photo. It helps to find the root cause.

15

Local repair, partial reconstruction or new roofing

Local repair is suitable when damage is limited: a separate salary, a section of membrane, several coating elements or a specific drain. Partial reconstruction is justified with a serviceable frame and problems on one ramp. A complete replacement is reasonable to consider when a large number of elements are worn out, leaks are repeated, damage to load-bearing structures is detected, or major insulation is planned outside. The cost should be compared not only today, but also with the possible re-opening in a few years. Sometimes expensive overhauls are more economical than a chain of small interventions; sometimes the opposite is true. Ask the contractor to list the remaining risks after local operation, describe the expected life of the stored items, and specify what exactly is included in the warranty. In the Netherlands, additional requirements may arise when changing the geometry, weight and appearance of the roof, so the decision to completely remodel must take into account permits and structural verification.

Practical tip

Compare the two estimates on the same area and with the same safety and disposal conditions.

16

Rocked roof: ceramic or concrete tiles

When reconstructing a pitched roof, the choice of shingles affects the appearance of the house, the load on the truss system, the slope requirements and further maintenance. Ceramic shingles are molded from clay and valued for their traditional character; concrete shingles differ in composition and can be an economical solution. But to compare them only by name is wrong: specific models differ in weight, geometry, water absorption, fastening, compatibility with skate and ventilation elements. Not all tiles are suitable for a small slope. The supplier must confirm the installation conditions for the selected model and the wind mounting details. It is worth discussing in advance the color, texture, the presence of additional elements, the availability of similar products for future repair and the procedure for cleaning drains. The most beautiful sample in the store will not help if the design of the roof is not designed for its weight or the installation is made without the right abutments.

Practical tip

Ask for an exact model, technical sheet and photos of several already made roofs from the selected material.

17

Flat roof: bitumen, EPDM, PIR and water drainage

On a flat roof, the main problem is often hidden in the details. Water should go to the water receivers; the seemingly horizontal flooring has a system of slopes provided by the design. Bitumen waterproofing can be convenient for some repair methods and multilayer solutions, and EPDM - an elastic membrane system - allows you to reduce the number of seams on suitable areas. The choice depends on the state of the base, geometry, adjoining, layer compatibility and fire safety requirements. PIR-plates are often used as part of a warm flat roof, but their characteristics should be evaluated together with fastening, steam control and waterproofing. Especially important is the arrangement of parapets, door thresholds on the terrace, ventilation passages, water receivers and emergency overflow. It is not always possible to simply put a new material on an old membrane: sometimes it is first necessary to eliminate moisture in existing layers. Acceptance should include not only the appearance of a flat surface, but also the control of key nodes.

Practical tip

Ask for photos and a diagram of drains, parapets and each roofing passage before signing the estimate.

18

What do λ, Rd and Rc mean: choose a heater by characteristics

The thermal conductivity λ is often indicated on the packaging of the insulation: the lower it is, all other things being equal, the smaller the thickness will be required for a comparable resistance to heat transfer. The indicator Rd characterizes the resistance of a particular insulation layer, and Rc - the resistance of the entire structure, taking into account the remaining layers according to the method used. Therefore, the advertising statement "material is warm" does not say anything about the required thickness for your roof. For example, a thinner PIR plate may have comparable resistance to a thicker layer of fibrous insulation; but this does not mean that the PIR is automatically better for fire safety, acoustics, or moisture behavior. In the materials provided, specific thicknesses are found as universal recommendations. For the Netherlands, it is more correct to start from the measured design, project purpose, product specifications and current requirements. Also take into account the bridges of cold through the rafters: calculation only on the insulation may look better than the real result.

Practical tip

Ask the contractor for the estimated Rd of the new insulation and an explanation of the final design, not just the thickness figure in centimeters.

19

Mineral and glass wool: where they are especially useful

Stone and glass wool are available in mats and plates, which are conveniently placed between wooden rafters. Their advantages depend on the product: availability, ability to fill complex interstyre spaces, good acoustic properties and high class of fire response in many mineral wool products. During installation, a tight fit without crumpling, no gaps, correct fixation and protection of the structure from uncontrolled moisture are important. Wet material should not just be covered with a finish, hoping that it will dry. Mineral wool lets water vapor through, but this does not eliminate the need to design airtightness and vapor regulating layers. In the old attic separately check the condition of the rafters and the existing film. Good work is not reduced to the purchase of expensive mats: poorly glued joints in the ceiling zone can cross out some of the benefits of insulation.

Practical tip

Check the fit of the insulation to the corners, walls and places of passage of the wires before installing the internal lining.

20

PIR, EPS, XPS: When hard plates are appropriate and when they create risk

Hard plates allow high resistance to heat transfer at a limited thickness and can be convenient for outdoor systems. PIR is often chosen when there is little space. EPS is used in certain roofing solutions; XPS is valued for strength and low water absorption in specially designed structures. It is impossible to consider any foam board simultaneously ready-made waterproofing and vaporproofing of the entire roof: joints, fasteners, abutments, fire characteristics and interaction with wood require a separate solution. On an old stingray, the installation of a very vaporproof layer without assessing the existing structure can lock moisture in the wooden elements. Indications from advertising materials about the “complete vapor resistance” of all rigid insulation is also too rude: the characteristics depend on the material and thickness. For a flat roof, additionally take into account the pressure from the coating, the method of fastening and the consequences of water stagnation.

Practical tip

Choose not the "warmest stove", but a consistent system with the documented characteristics of each layer.

21

Cellulose, wood fibre and sprayed systems

Alternatives include cellulose blowout systems, fibreboards and sprayed materials. Their advantages can include filling hard-to-reach cavities, acoustic comfort, certain environmental properties or the ability to work without completely dismantling the coating. But every way has a limit. Blowing requires control of the filling density and understanding of the cavity; wood fiber needs properly calculated protection from moisture; sprayed foams are more difficult to remove in future repairs of rafters or communications. The release of substances during application and fire characteristics require verification for a specific product and method of installation. Seamless should not be considered as proof of the absence of all bridges of cold. It is useful to specify in advance how to examine the hidden wood and what will happen if necessary local repair. The choice of biomaterial may be interesting from the point of view of the Dutch support programs, but compliance with the conditions must be checked separately.

Practical tip

Ask the contractor about certificates, application quality control, system repair, and the possibility of subsequent dismantling.

22

Warm attic or cold attic: which option is more economical

This is one of the most important questions for a home owner. If the attic is used as a bedroom, study, playroom or bathroom, stingrays and pediments are usually insulated to include space in the warm contour of the building. If the room is not heated, closed with a hatch and serves only as a storage place, it is often more effective to insulate the ceiling under it. The area of insulation in this case is smaller, the work is easier, and the volume of heated space does not grow. But you can not heat insulate only the ceiling, if the attic is open to living rooms and warm air freely enters the top. Think about the future in advance: if in a year you decide to equip the bedroom, the insulation of the flooring, you may have to redo it. In the articles provided, this choice is described in relation to the cottage; for a Dutch house, the principle is also useful, but the specific design of the ceiling and ventilation conditions should be checked on the spot.

Practical tip

Answer the question of whether the attic will be residential or heated in the next five years before choosing a place of insulation.

23

Insulation from the inside: how to keep the attic dry

Working from the inside allows you not to remove all the tiles, but requires knowledge of the device of the old roof. Before installation, you need to find out what films and insulation are already above the rafters. If the outer layers let vapor through weakly, adding insulation from the inside can change the temperature of the wood and increase the risk of condensation. First, repair leaks, remove damaged materials and check the humidity. Then form an insulating layer with minimal cracks and arrange airtightness from the side of the room, providing for correct steam regulation. Places near walls, sockets, hatches, beams and attic windows require special attention. It is impossible to mindlessly mix different films without understanding where the point of possible moisture accumulation will be. The inner lining should allow you to correctly place engineering communications and not damage the sealed layer with dozens of holes.

Practical tip

Ask to photograph the gluing of joints and abutments before closing drywall.

24

Insulation outside: when reconstruction gives the best result

If you plan to replace shingles or repair the entire ramp, exterior insulation should be considered along with roofing. It helps to create a more continuous layer over the wooden elements, reduce the impact of cold bridges and maintain the useful height of the attic. But the thickness of the roof cake changes, which means that adjacent to windows, walls, chimney and drains may require alteration. On some houses, the extra height affects the architectural limitations and requirements of the municipality. The work requires reliable temporary protection from rain, as the old coating is removed. If old materials remain on top of the existing structure, the specialist should assess their humidity and load-bearing capacity. A properly executed exterior scheme is often more convenient during major renovations, however, it is not the universal answer for any building.

Practical tip

Discuss with the contractor the total cost of outdoor insulation along with the replacement of the coating: separate installation after a few years is usually more expensive.

25

Moisture, steam insulation and ventilation: three different tasks

Water vapor, liquid water and air movement are not the same thing. Waterproofing protects against rainwater, the vapor-regulating layer limits the transfer of moisture from the room, and tightness does not allow warm moist air into unwanted cavities. Ventilation under the coating in a suitable design helps to remove moisture, but the need and arrangement of the gap is determined by a specific roofing system. You can not mechanically repeat one “cake” from the Internet: a flat roof, an old stingray with bitumen lining material and a new modern stingray solutions differ. Condensation can occur only after a few winters, when the wood has already lost its strength. Therefore, it is especially important before installation to determine which layers exist now, and which are added, and where the structure can dry. In doubtful cases, the calculation of the humidity regime is necessary.

Practical tip

Ask for a scheme of layers, which distinguishes waterproofing, protection against steam, airtightness and ventilation path.

26

Dakkapel: additional area and new vulnerable nodes

The dakkapel superstructure creates a vertical front with windows and increases the comfortable height of the attic, but changes the load-bearing system and the geometry of drainage. It requires thoughtful reinforcements around the opening, insulation of the side walls, the front facade and its own roof. The most difficult places are the connection of vertical walls with the main ramp, gutters and airtightness at the transitions. If the entire roof is reconstructed at the same time, the integration of dakkapel insulation can be more convenient; when inserted into the finished structure, the old protective layers must be especially carefully restored. The word “dakkapel” does not mean that permission is not required: admissibility depends on location, size and local regulations. In addition, an increase in the area of a new superstructure may not fall under the same subsidy as the insulation of an existing roof. These nuances are important to discuss before ordering windows and frame.

Practical tip

Make a separate diagram of dakkapel abutments and check the object through Omgevingsloket.

27

Attic windows, chimneys, endowments and tightness

Most unpleasant surprises appear where the roof plane is interrupted. The attic window requires a compatible salary, thermal insulation of the frame and proper drainage on top and sides. The chimney has its own fire and waterproofing requirements. Endows collect water from two stingrays, so errors in geometry and connections are especially dangerous. On a flat roof, adjoining parapets, hatches and ventilation passages are just as sensitive. Smearing an old compound with a sealant without assessing its design is often a short-term measure. During reconstruction, it is convenient to replace damaged seals, finishing elements and drains, while safe access is organized. A good estimate describes these nodes individually, rather than hiding everything behind the words “turnkey installation”.

Practical tip

Ask for a photo of each aisle and adjoinment after waterproofing, but before closing with decorative details.

28

The price of roof repair: how to read the estimate without traps

The cost depends on the area and complexity of the stingrays, the slope, the height of the building, access for forests, the need for dismantling, waste removal, the condition of the wood, the level of insulation and the coating material. Two identical houses in area can have a completely different value due to the number of ends, windows and chimneys. Ask separately to count examination, work safety, dismantling, base repair, membranes, thermal insulation, roofing, salaries, gutters, interior decoration and cleaning. If the price of materials is still indicative, this should be clearly indicated. Clarify what hidden defects may change the estimate and how such changes are agreed before additional work is done. It is better to compare offers by the finished result: with the inclusion of the necessary details and guarantees, and not only at the price of a square meter of coverage. For preliminary calculation, the customer will need photos, dimensions, roof type and a list of desired changes.

Practical tip

Give the contractor the same set of raw data if you want to compare multiple offers honestly.

29

Support and subsidies in the Netherlands: what to check before ordering

For owners of existing homes in the Netherlands, the ISDE program can provide support for roof insulation or attic flooring, if the conditions for area, thermal insulation resistance, contractor and documents are met. According to RVO, in 2026, for the corresponding measures, a minimum Rd of the new material is 3.5 m2K/W and a minimum total area of 20 m2 is provided. But this does not mean that any new attic or annex automatically receives compensation: the expansion of the area has some limitations. Rules, amounts and admissible materials should be checked before concluding a contract on the official website of the RVO. Ask the contractor to indicate the insulation area, type of material and characteristics in the invoice; keep payment confirmations and photos if required by the terms of the program. Urban support programs may vary further by address.

Practical tip

Check the current RVO and local gemeente requirements before ordering; do not consider the subsidy a guaranteed part of the budget.

30

Acceptance of work: how to know that the roof is really made correctly

The beautiful view of the new shingles is only part of the check. Before the final calculation, you need to make sure that photos of hidden stages are saved, the composition of the installed materials is indicated, wood defects are eliminated and guarantees are issued. Inspect the gutters, the condition of the connections around the windows and chimneys, the finish of the attic, hatches and ventilation elements. Check whether maintenance instructions are available and the procedure for detecting a leak is clear. If the contractor has discovered hidden problems, it is important to have agreed changes to the estimate and proof of compliance. In complex reconstruction, professional tests and documentary verification of compliance with standards may be required. Finally, ask to explain the schedule of regular maintenance: timely cleaning of gutters and inspection after strong winds help to prolong the life of the roof.

Practical tip

Keep a single archive: estimate, contract, layer plans, materials passports, photos of hidden stages and warranty documents.

31

Frequent questions from home owners

“If the roof is not leaking, why insulate?” – to increase comfort and reduce heat loss, but first find out the condition of the existing layers. "Is it possible to insulate only the attic?" - yes, if it is separated from the heated space and is not planned as a living room. “Foam is better than cotton wool?” – there is no universal winner; thermal, fire, acoustic properties and humidity scheme are important. “Do you always need to change all the shingles?” – No, local repairs are sometimes enough. "Will the insulation remove the leaks?" - No, the cause of the leak is eliminated separately. “What thickness of insulation to choose?” – according to the required resistance and a specific product, not one universal figure. “Do you need a project for dakkapel?” – check the design requirements and rules through Omgevingsloket. “Is it possible to get an exact price for one photo?” is usually only a preliminary estimate: hidden defects and details of adjoinments are determined during the examination.

Practical tip

If you still have questions, attach a roof plan and photos to the treatment: this will help you get a more substantive estimate.

Useful source: Official guidance ↗

Let’s discuss your project

Share photos and your requirements so we can assess the scope of work.

View this service ↗